COBHAM AVIATOR 700 - List of H + Cause Codes

Chapter 6: Troubleshooting
192 SDU errors
• Call Reject cause codes appear after logon, during call attempts.
The following section shows the two lists of H
+
cause codes with
explanations of the error messages.
List of H
+
Cause codes
Logon Reject Cause Codes
The following list shows the cause codes that may appear during logon.
Note
Cause Codes should not be mistaken for BITE error codes. See the
previous page for an explanation of the two kinds of error codes.
Display Text ID Description Guidance
ClassReject 0x88 Class rejected The GES does not support
this class.
GlobChanLoss 0x82 Global channel loss Verify that there are no
obstacles between the
satellite and the AES
antenna.
GlobCunavlb 0x09 Global C channel
not available at
GES
ManualLogRej 0x89 Manual login
rejected
Manual logon is not allowed
when logon policy is
automatic.
NetworkFail 0x03 Network Failure
NoGesSignal 0x81 No GES signal
NoInitData 0x86 No valid system
table available