Chapter 5: System operation
Use the SBU web interface 177
5555
View the lists of calls
To see information on outgoing, received or missed calls or data sessions,
select one of the following lists from the left navigation pane in the CALLS
page:
• Outgoing calls shows the start time, receiving end phone number,
duration, type (Standard or 3.1 kHz Audio) and estimated charge of
each outgoing call.
• Received calls shows the start time, calling phone number, duration
and type (Standard or 3.1 kHz Audio) of each incoming call.
• Missed calls shows the start time, calling phone number and type
(Standard or 3.1 kHz Audio) of each incoming call that was not received.
• Standard data sessions shows the start time, bytes in, bytes out and
estimated charge of each Standard IP session.
• Streaming data sessions shows the start time, duration, type
(Streaming 8, 16, 32, 64, 128 kbps or X-Stream) and estimated charge
of each Streaming IP session.
Date and time is the international UTC time, received from the satellite. In
casual use, UTC is the same as Greenwich Mean Time (GMT).
For information on the available types of service, see AVIATOR 700
Services on page 4.
You can sort each of the lists by clicking the title of the column you wish to
sort by. If a list covers more than one page, you can click the relevant link at
the bottom of the page, to go to another page.
The estimated charge is based on your entries under
ADMINISTRATION > Call charges. Thrane & Thrane does not take
responsibility for the correctness of this estimated charge. This
calculation is only a rough estimate of the charge, based on the
tariff entered by the user. Also, the airtime provider may have
different methods of calculating the charge.
To Next Page
Loading...
