COBHAM AVIATOR 700 - How to Make Calls from the Full Feature Handset

Chapter 3: Calls, faxes and SMS
Operate the handsets 71
3333
Calls, faxes and SMS
How to make calls from the Full Feature
handset
Before making a call make sure the display shows “Ready” or that the
service you want to use (H+ or SW 64) is available, i.e. the service LED for
Classic Aero (H+) is lit.
Do as follows:
1. Type in the phone number with the prefix 00.
Example: To call Cobham SATCOM VA (+1 757 463 9557), press the
number:
TT for Voice,
J for country code,
then
PNPMOLRNNP
2. Press I, C or U to activate the call.
The display on the terminal handset shows how the call proceeds.
3. Hang up by pressing
I or placing the handset in the cradle. When the
call is terminated, the display shows the duration of the call.
Example:
The phone book can also be used to initiate a call, either by selecting an
entry in the phone book or by using the Quick Dial function.
Answer a call
Answering a call to the Full Feature handset can be done in two ways:
• If the handset is in the cradle, simply take the handset from the cradle
to answer the call.
• If the handset is out of the cradle, press
I to answer the call.
Connected:
00:01:59