Chapter 3: Calls, faxes and SMS
Use a phone or fax machine (SDU) 37
3333
Make or receive a phone call (SDU)
Analog phone, ISDN phone or Full Feature handset
There are different methods for activating a call, depending on the type of
phone:
• Analog phone or ISDN phone: Dial the number and press #.
• Full feature handset: Dial the number and press the off-hook key.
To make a call (air to ground) (SDU)
You have the following options for making a call:
• Manual Dial. Dial 00 <country code> <phone number> followed
by # or off-hook key.
Example: To call Cobham SATCOM VA that has the country code 1
and the phone number 7574639557 press 00 1
7574639557 followed by # if calling from an analog or
ISDN phone.
• Full Feature handset: Call a number in the SDU phone book. If
the number you want to call is in the phone book of the SDU, find the
number in the phone book and press # or off-hook key.
Example: To call entry in the SDU phone book with the name Jones, press
CC to enter the phone book, then N. To find an
entry with the name Larsen, press N three times.
For more detailed information about the SDU phone book see
Use the SDU phone book on page 115.
If there was an error establishing the connection, refer to SDU errors on
page 190.
To receive a call (SDU)
By default, all devices connected to the 4-Wire interfaces, 2-Wire interface
and the ISDN interface will ring when one of the mobile numbers is called.
Note, however, that this depends on the call type settings made during
initial configuration of the system. For further information, see the
To Next Page
Loading...
