Chapter 5: System operation
132 Full Feature handset operation (SDU)
To enable/disable disclosure of the aircraft position
Select Disclose Pos to view or change the Disclose Position status.
Use B and E to toggle between Enabled and Disabled.
• If you select Enabled, the position of the aircraft will be disclosed to
the earth station for use in the Inmarsat network.
• If you select Disabled, only the ID of the current spot beam is
disclosed.
To turn off the broadcast ring tone for an interface
Select Fax setup to determine which interface should not ring on a
broadcast call.
Use
B and E to scroll through the interface options and select with
C.
You may select:
•POTS #5
•POTS #6
• POTS #5 & #6, or
•Not Connected
To Next Page
