Chapter 5: System operation
Full Feature handset operation (SDU) 137
5555
To access the Pin Setup submenu, enter the System Setup menu,
scroll down to Pin Setup and press
C.
To access the PIN codes
To access the PIN codes you want to change or disable, do as follows:
1. Scroll to the PIN code type you want to change or disable.
2. Enter the current PIN code for the selected type.
3. Toggle between Change Pin and Disable Pin and use
C to
select the function.
• Change Pin: Choosing Change Pin you will be prompted for
a new PIN code. Enter a new PIN code of 4 to 8 digits and use
C
to accept the code. When you are prompted to re-enter the PIN
code, enter the code again and accept with
C.
• Disable Pin: Select Disable Pin to disable the PIN code
you entered. Press
C to confirm the deletion.
When you disable a PIN code, the functions that were previously
restricted by the selected PIN code will now be freely available.
Pin Setup
OK
Change Pin
Disable Pin
OK
Enter new
Pin Code
Repeat new
Pin Code
OKOK
Press OK
to confirm
OK
NormalUsrPin
SuperUserPin
ServPrvdrPin
Enter
Pin Code
The Super User PIN code can also be used where Normal User
PIN code is required.
To Next Page
Loading...
