Chapter 6: Troubleshooting
194 SDU errors
Call Reject Cause Codes
The following list shows some of the cause codes that may appear when
the system is logged on. The SLCV codes refer to: S = coding S
tandard, L =
cause L
ocation, C = cause Class, V = cause Value.
WrongGES 0x85 GES not existing Check GES ID validity.
WrongGESid 0x06 Wrong GES
identifier
Check GES ID validity.
WrongParam 0x02 Wrong Parameter
WrongSatID 0x05 Wrong Satellite
identifier
Check satellite ID validity.
Display Text ID Description Guidance
Display text
Code
Description
S L C V
0 0 1 0 0 0 1 0 Normal clearing by called/calling
party
1 1 7 15 1 1 7 15 Undefined cause
1 2 7 15 1 2 7 15 Undefined cause
1 3 7 15 1 3 7 15 Undefined cause
1 4 7 15 1 4 7 15 Undefined cause
AddrComplete 1 3 0 1 Address complete signal sent to
terrestrial network
AddrComplete 1 6 0 1 Address complete signal received
from terrestrial network
AESabsent 1 3 7 3 Calling/called AES not logged-on to
system
To Next Page
