Chapter 3: Calls, faxes and SMS
Use a phone or fax machine (SDU) 39
3333
Local numbers
• 00: The terminal will behave as if it has received a call using the AES
ID (a broadcast call to all handsets)
• 01: Handset #1 (Full Feature handset)
• 02: Handset #2 (Full Feature handset)
• 03: Handset #3 (Full Feature handset)
• 04: Handset #4 (Full Feature handset)
• 05: POTS #5 (2-wire analog phone)
• 06: POTS #6 (2-wire analog phone)
Swift64 numbering rules
IMN (Inmarsat Mobile Number): To make a ground-to-air call to a
terminal using swift64, the caller can use the IMN numbers as follows:
Dial +870 <IMN number>
An IMN is the network identification for a specific service on a specified
terminal. The service can be ISDN DATA64, ISDN DATA56, SPEECH or
AUDIO3.1.
Example: If the IMN number is 612345678 and you are making the call
from USA, dial 011 870 612345678.
To make local phone calls (SDU)
You can make local phone calls between any of the POTS phones and 4-
wire handset interfaces of the SDU.
To make a local call to a phone connected to the SDU do as follows:
Dial <local number> and press # or the off-hook key.
This feature works with handsets connected to the SDU.
Check whether the handset is marked “SDU”.
The local number is shown in the lower right corner of the display
of the Full Feature handsets.
To Next Page
Loading...
