v
• Calls, faxes and SMS - a detailed description how to make calls, from
the Full Feature handsets or the MCDU (Multi-function Control and Display
Unit, how to send faxes and how to send and receive text messages. Also a
short description of other handsets.
• Use a computer – a description of how to connect and set up a
computer for using SwiftBroadband or Swift64 data services, including
LAN and WLAN connection, ISDN and MPDS connections, PPPoE and
analog modem connection.
• System operation with setup information for the Full Feature handset,
MCDU and the SwiftBroadband Unit.
• Troubleshooting – a short troubleshooting guide, a description of
system LEDS and error messages that may appear during operation. Also a
list of H
+
Cause codes and information on where to get further help if
necessary.
Note that this manual does not cover the installation, configuration and setup
of the system. It does neither cover how to customize the system for specific
applications. For more detailed information how to set up interfaces and
configure network setup and routing functionality see the AVIATOR 700
Installation and maintenance manual.
You find the part numbers for related manuals in Related documents on the
next page.
This manual may not always reflect the latest software functionality of your
AVIATOR 700 system. To obtain the latest version of the manual, please enter
the Cobham SATCOM web site at: www.cobham.com/satcom, select
Cobham SYNC Partner Portal and download the latest version, or acquire
it from your distributor.
Software version
This manual describes the following:
AVIATOR 700 (Level E) with the following software:
• SBU: AVIATOR 700: 1.09 (Level E) or greater
• SDU: AVIATOR 700: 1.15 (Level E) or greater
The software used to control the unit operation complies with RTCA
specification DO-178B level E application software.
The firmware used to control the unit operation complies with RTCA
specification DO-254D level E firmware.
To Next Page
Loading...
