Chapter 3: Calls, faxes and SMS
Use a phone or fax machine (SBU) 55
3333
To handle waiting calls (SBU)
During a local or external call, if a second party attempts to make contact
with you, you may hear a Call Waiting indication. This indication is two
beeps and a pause of 3 seconds, then two beeps again etc. If no action is
taken, the waiting call is released after a time-out period.
In the web interface you can enable or disable the call waiting indication.
For further information how to set-up the call waiting function see the
AVIATOR 700 Installation and maintenance manual.
When you receive a Call Waiting indication, you have the following options:
The phone must have an R key to be able to use these functions.
If you want to: Do as follows:
Clear the current call, and
accept the waiting call.
Press R 1 #, within the time-out period.
Hold the current call, and
accept the waiting call.
Press R 2 #, within the time-out period.
Ignore the waiting call. Take no action.
Reject the waiting call. Press R 0 #, within the time-out period.
The SwiftBroadband system only supports one circuit-switched
call at a time per AVIATOR 700 system.
To Next Page
Loading...
