Chapter 3: Calls, faxes and SMS
82 Operate the handsets
For this you need to enter the following details into the device:
• SIP server name, port and address, default: 192.168.0.1
•User name
•Password
•Codec priority
•Realm
User name: When connecting to a SwiftBroadband Unit, the user name
should be a local number, i.e. 05xx. This must be configured in the built-in
web interface under SETTINGS > IP handsets.
Password: When connecting to a SwiftBroadband Unit, the password is
the local number for this phone. It is a number in the range of 0501 to 0516
which is not yet assigned to other IP phones. The password must match the
IP Handset password entered in the SwiftBroadband Unit.
Codec priority: Select the codec type that should have the highest
priority. You may select G.711 A-LAW.
Realm: When asked for Realm enter the serial number of the AVIATOR 700
SBU.
Having established this connection you can make calls with SIP-enabled IP
handset and it can be called to, also as a local phone of the AVIATOR
700system.
All charges for calls and data sessions are billed to the AVIATOR
700 system.
To Next Page
Loading...
