Horizon Starter Manual ix
Preface
Warnings alert you to actions or situations that could result in
personal injury. For example:
Refer to this Starter Manual for procedures on how to perform the
most common imager operations, including:
•
Setting up the imager
•
Loading media
•
Sending print jobs from DICOM Print Service Class-compliant
applications running on imaging devices or image viewing
workstation
•
Changing the imager’s default image and sheet settings
•
Adjusting the appearance of printed images for user preference
•
Performing preventive maintenance
•
Performing film calibration
•
Troubleshooting common problems
NOTE:
This manual is current to the Horizon Imager v1.8.3 software. Some features and
functions described here may not apply to older versions of the software.
WARNING With the imager cover open, touch only those internal components
that are colored green (except for the pick tires).
Purpose and Scope
3
To Next Page
Loading...
