Horizon Starter Manual xv
Preface
Temperature Warning
Because the Horizon imager is a thermal print device, the surface
of the thermal print head heat sink gets hot. Avoid directly touching
any components not colored green when accessing the interior of
the imager if the imager has been printing. (During some
preventative maintenance tasks, you will be touching internal
components with cleaning pads or swabs.)
The temperature warning label is shown below.
Compliance
Codonics is in compliance with various regulations, of which details
are listed in Appendix A.
The Compliance label, which is affixed at the back of the imager, is
shown below.
EN 60601-1
CODONICS
To Next Page
Loading...
