6-2 Default Print Job Settings
Changing the Default Media Type and Size
One default media is specified for grayscale images, and one for
color images.
In practice, the PostScript driver or DICOM application will override
the Default Media setting. Default Media is available for the small
number of installations for which this is not the case.
When the imager receives a grayscale image, it prints the image to
the default grayscale media type and size, unless otherwise
specified. Likewise, when the imager receives a color image, it
prints the image to the default color media type and size.
1. Press the key.
2. Use the and keys to select the
Default Media
option, then
press the key.
3. Select the desired image type—
Grayscale
or
Color
. A settings
menu option is displayed for each available media type
supported by your imager.
In addition to the settings options, the Default Media menu also
contains an option to reset the settings.
Changing the Default Settings
8
To access the
Default Media
settings
MENU
S
T
ENTER
To Next Page
Loading...
