Horizon Starter Manual 6-3
Default Print Job Settings
Changing the Default User Settings
Default User Settings are located in the Administrative-level Main
Menu options.
1. Press the key and, while holding it, press the key.
2. Use the and keys to select the
Default User Settings
option,
then press the key. A settings menu option is displayed
for each available media type supported by your imager.
In addition to the settings options, the Default User Settings menu
also contains an option to reset the settings.
CAUTION
If the imager’s settings were changed from the factory defaults
prior
to
being shipped (for example, to accommodate a special OEM configuration), resetting
to the factory defaults will not restore the “as shipped” settings. Instead, they will be
reset to the standard factory default values.
CAUTION
Resetting to the factory defaults will affect prints made by other users. Use
caution when changing default settings. Typically, it is better to specify sheet and
image parameter settings from the DICOM application or a PostScript printer’s
settings, or use a Job Settings file that contains the values you need. For information
about Job Settings files, refer to the
Horizon Imager Technical Manual
.
8
To access the
Default User
Settings
W
MENU
S
T
ENTER
To Next Page
Loading...
