Codonics Horizon - Testing Network Printing

4-2 Printing from DICOM Applications
DICOM Conformance Statement
The Horizon imager conformance statement is available on the
Codonics web site ( www.codonics.com ). It can also be mailed or
faxed to you on request.
Your key operator or DICOM application vendor must configure the
DICOM application running on each imaging device printing to the
Horizon imager. This application is the Print Service Class User
(SCU). The imager is the Print Service Class Provider.
Two pieces of information must be entered into the SCU: the Called
AE Title , and the imager’s TCP port number. This information does
not usually need to be configured at the Horizon imager.
The port number is 104 .
Common AE Titles are listed in the following table, which also
describes how they are used.
Additional instructions about configuring DICOM are included in
the Horizon Imager Technical Manual .
Configuring the DICOM Application
Called AE Title That Can Be Used Description
Print_SCP For standard print jobs.
mcmBracket and gcsBracket For printing bracketing sheets. For more
information, refer to the
Horizon Imager
User’s Manual
.
SpecialSlide For printing 35-mm slides. For more
information, refer to the
Horizon Imager
Technical Manual
.
The name of a Job Settings file For printing using Job Settings files to
specify print job parameters. For a list of
Job Settings files provided with the
imager, refer to Appendix B.