Horizon Starter Manual 1-5
Setting Up the Imager
9. Using a print head cleaning wipe included in the Accessory box,
gently clean the imager basement of any debris.
Cross-Section of Imager, Showing Location of Hide Track and Basement
(with receive trays and cassettes installed)
10. Remove the receive trays from their box.
11. Using a platen roller wipe included in the Accessory box, clean
the receive trays of any dust or debris.
NOTE:
Save the imager box and all packing material. You must reinsert any packing
material and use the original box to ship the imager. Refer to “Preparing the Imager for
Shipment” on page 1-15 for more information.
CAUTION
Do not scratch or nick the sheet metal. Scratches and nicks in the
basement will damage the printed side of
ChromaVista
sheets.
Receive trays
Cassettes
Hide track
Basement
3
To Next Page
Loading...
