Codonics Horizon - Page 5

iv Contents
Image Scaling .................................................................................... -xxiv
Hardware Variations............................................................................ -xxv
Indications for Use..................................................................................... -xxv
Chapter 1: Setting Up the Imager
Preparing for Installation............................................................................. 1-1
Installing the Imager ................................................................................... 1-2
Connecting the Ethernet Cable .................................................................. 1-6
Powering On the Imager—First Time ......................................................... 1-8
Cleaning the Platen Roller ................................................................... 1-9
Network Settings—Simple Network.......................................................... 1-10
Specifying the Imager’s IP Address ................................................... 1-11
Determining an IP Address.......................................................... 1-11
Specifying the Imager’s IP Address at the Control Panel............ 1-12
Specifying IP Addresses for Other Devices on the Network .............. 1-14
Loading Media .......................................................................................... 1-15
Preparing the Imager for Shipment .......................................................... 1-15
Chapter 2: Basic Imager Operations
Horizon Imager Components...................................................................... 2-1
Powering the Imager On and Off................................................................ 2-3
Powering On the Imager ...................................................................... 2-3
Observing the Imager’s Operating Status in the Status Screen........... 2-4
Common Cassette Status Messages ............................................ 2-5
Color Ribbon Status....................................................................... 2-6
Powering Off the Imager ...................................................................... 2-7
Understanding the Control Panel ............................................................... 2-8
Control Panel Indicators....................................................................... 2-9
Alert and Fault Messages and the Fault Tone ................................... 2-10
Control Panel Display......................................................................... 2-10
Main Menu ................................................................................... 2-10