3-30 Setting Up the Software
TIP:
Copying an existing Job Profile to create a new one
To create new Job Profiles, you can copy an existing Job Profile—for example,
job.default.txt
or
job.auto.txt
, which are preinstalled on every SmartDrive—rename it, and
modify the parameters as necessary.
endOfStudyTimeout = Number of seconds after an image is received for the
device to assume that the job is complete.
If doAutoRecord = True and this time-out occurs, a job
for the images received to that point will be added to
the Job List for recording.
postProcessingAction = Specifies whether to save or delete the study after it
has been recorded successfully to disc.
Choices are: Save, Delete.
siteProfileName = Specifies the site profile to use when printing the disc
label.
If no site profile name is specified, the default site
profile is used.
Table 3-5. Job Profile Format and Parameters (Continued)
Parameter Description
/
To Next Page
Loading...
