InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
BusL power factor in phase L2.
13.1.1.18 Value: BL Ld char L2
Character of the BusL load in the L2 phase. "L" means inductive load, "C" is
capacitive and "R" is resistive load (power factor = 1).
13.1.1.19 Value: BLPf L3
BusL power factor in phase L3.
13.1.1.20 Value: BL Ld char L3
Character of the BusL load in the L3 phase. "L" means inductive load, "C" is
capacitive and "R" is resistive load (power factor = 1).
13.1.1.21 Value: BusL freq
BusL frequency. The frequency is measured in the phase L3.
To Next Page
Loading...
Need help?
General
