InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
NOTE:
See the chapter Timers for more details about timers.
14.2.1.40 Binary input: Timer block 10
This input is used to disable temporarily the output from the Timer channel
#10.
NOTE:
See also the setpoint TimerChannel 10 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.41 Binary input: Timer block 11
This input is used to disable temporarily the output from the Timer channel
#11.
NOTE:
See also the setpoint TimerChannel 11 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.42 Binary input: Timer block 12
This input is used to disable temporarily the output from the Timer channel
#12.
NOTE:
See also the setpoint TimerChannel 12 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
To Next Page
Loading...
Need help?
General
