InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
14.2.1.43 Binary input: Timer block 13
This input is used to disable temporarily the output from the Timer channel
#13.
NOTE:
See also the setpoint TimerChannel 13 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.44 Binary input: Timer block 14
This input is used to disable temporarily the output from the Timer channel
#14.
NOTE:
See also the setpoint TimerChannel 14 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.45 Binary input: Timer block 15
This input is used to disable temporarily the output from the Timer channel
#15.
NOTE:
See also the setpoint TimerChannel 15 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
To Next Page
Loading...
Need help?
General
