InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
15.2.1.5 Binary output: VbusL <>
The output is closed while the busL over/under voltage alarm is present in
the alarm list.
15.2.1.6 Binary output: VbusR <>
The output is closed while the busR over/under voltage alarm is present in
the alarm list.
15.2.1.7 Binary output: fbusL <>
The output is closed while the busL over/under frequency alarm is present in
the alarm list.
15.2.1.8 Binary output: fbusR <>
The output is closed while the busR over/under frequency alarm is present in
the alarm list.
15.2.1.9 Binary output: BusL OK
The output is closed if healthy busL voltage is present. It opens immediately
if busL voltage or frequency gets out of the limits.
15.2.1.10 Binary output: BusR OK
The output is closed if healthy busR voltage is present. It opens immediately
if busR voltage or frequency gets out of the limits.
To Next Page
Loading...
Need help?
General
