InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
NOTE:
This output do not indicate the requested reserve has been already
fulfiled. It only indicates whether the system is able to fulfil it or not.
15.2.1.16 Binary output: Syst res OK
The output is closed while the actual reserve is above the selected reserve
for start.
15.2.1.17 Binary output: Syst res 1 OK
The output is closed while the actual reserve is above the reserve for start
from the reserve set #1.
15.2.1.18 Binary output: Syst res 2 OK
The output is closed while the actual reserve is above the reserve for start
from the reserve set #2.
15.2.1.19 Binary output: Syst res 3 OK
The output is closed while the actual reserve is above the reserve for start
from the reserve set #3.
15.2.1.20 Binary output: Syst res 4 OK
The output is closed while the actual reserve is above the reserve for start
from the reserve set #4.
To Next Page
Loading...
Need help?
General
