ComAp InteliNano NT Plus

InteliNano-NT Plus, SW version 2.0.1.x, ©ComAp – July 2015
63
B05
Units Format
Units:
Step:
Range:
1,2
Default value:
1
This setpoint is affecting unit format for pressure and temperature.
Setpoint code
Value
Meaning
Pressure
Temperature
B05
1
Metric unit format
bar
°C
B05
2
US unit format
PSI
°F
When you change this setpoint all values will be automatically recalculated including user definable
sensor curve for analog input