ComAp InteliNano NT Plus

InteliNano-NT Plus, SW version 2.0.1.x, ©ComAp – July 2015
64
B06
AMF Function
Units:
Step:
Range:
1,2
Default value:
2
When AMF Function is disabled than the system is working as MRS controller and setpoints related
to AMF function are hidden.
Setpoint code
Value
Meaning
B07
1
Disable
B07
2
Enable
Controller main screens in AMF mode (AMF Function enabled)
Figure 10.2
AMF SCREENS
Controller main screens in MRS mode (AMF Function disabled)
Figure 10.3
MRS SCREENS