COMBA mPICO Series - 5.3.5 THRESHOLD; 5.3.6 POWER

USER MANUAL FOR mPICO SERIES
ENU Status : 1-0-1
Copyright - refer to title page
Page 37
Config:
Enter the required value in setting columns, and press [Config] button to finish the configuration
operation.
5.3.5 THRESHOLD
Threshold includes input power threshold, output power threshold.
Users can set alarm threshold according to the specific situation. If the measured value is lower than the
threshold lower limit or more than the threshold upper limit, the appropriate alarm will be generated.
Figure 32: Threshold
Config:
Enter the required value in setting columns of RF information window for Alarm threshold, and press
[Config] button to finish the configuration operation.
5.3.6 POWER
Power is referring to the reading of downlink input/output power.