COMBA mPICO Series - 5.3.8 MISCELLANEOUS; 5.4 ALARM

USER MANUAL FOR mPICO SERIES
ENU Status : 1-0-1
Copyright - refer to title page
Page 39
5.3.8 MISCELLANEOUS
Figure 35: Miscellaneous
Isolation detection working mode includes working mode and testing mode.
Note: Make sure is in working mode status; testing mode is for factory testing only.
5.4 ALARM
Alarm information operation is to select alarm parameters for monitoring. Alarm parameters include
separate band alarm and common device alarm.
Figure 36: Alarm