Mobile Expansion Unit (available on select models)
5-9
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: J Abercrombie Saved date: 05/11/00 5:07 PM
Part Number: 170706-002 File name: Ch05
Removing a MultiBay Device
To remove a device from the MultiBay in the mobile expansion
unit:
1. If the MultiBay device is a drive, remove any DVD, CD, or
diskette disc from it.
2. Slide forward the MultiBay release latch
on the right side of
the mobile expansion unit.
3. Pull the MultiBay device from the MultiBay
.
Inserting a MultiBay Device
To insert a device into the MultiBay in the mobile expansion unit,
be sure the drive connector is facing in, then slide the MultiBay
device into the MultiBay until the connector is seated.
To Next Page
Loading...
