Diagnostics and Troubleshooting 3-47
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server, then select View Device
Data. The selected server displays, with buttons around its perimeter.
2. Select the Recovery button, then select Integrated Management Log.
3. If a failed component has been replaced, select the event from the list, then select
Mark Repaired.
Printing the Event List
NOTE: You can only view the event list from the Recovery/Integrated Management Log screen as
described above.
1. From the Insight Manager, select the appropriate server.
2. Select the Configuration button, then Recovery button, then Print.
Compaq Survey Utility
The Compaq Survey Utility is a serviceability tool available from Windows NT and Novell
NetWare. It delivers online-configuration capture and comparison to maximize server
availability. It is delivered on the Compaq Management CD in the SmartStart package or is
available on the Compaq website. Refer to the Compaq Management CD for information on
installing and running the Compaq Survey Utility.
After running the Compaq Survey Utility, view the IML by loading the output of the utility
(typically called “survey.txt”) into a text viewer such as Microsoft Notepad. The event list
follows the system slot information. After opening the text file, print it using the print feature of
the viewer.
Compaq IML Management Utility
The Compaq IML Management Utility is a DOS-based tool that gives you the offline ability to
review, mark corrected, and print events from the IML. It is located on the Compaq SmartStart
and Support Software CD. Refer to the SmartStart Installation for Servers poster, which ships
with the server, for information on how to install and use the IML Management Utility.
To Next Page
Loading...
Need help?
General
