Compaq PROLIANT ML370 Maintenance And Service Guide

2-18 Compaq ProLiant ML370 Maintenance and Service Guide
Hard Drive Blank
IMPORTANT: A hard drive blank must be installed in an unused hard drive slot. Failure to install a hard
drive blank could result in system errors.
To remove a hard drive blank:
1. Open the front bezel (tower model only). See “Front Bezel” earlier in this chapter.
2. Squeeze the top and bottom tabs of the blank  .
3. Pull the blank out of the hard drive cage  .
1
1
2
Figure 2-14. Removing a hard drive blank
Reverse steps 1 through 3 to replace a hard drive blank.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English