EasyManuals Logo

Compaq PROLIANT ML370 Maintenance And Service Guide

Compaq PROLIANT ML370
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
3-8 Compaq ProLiant ML370 Maintenance and Service Guide
Table 3-2
POST Error Messages
Error Code Audible Beeps Probable Source of Problem Recommended Action
A Critical Error
occurred prior to this
power-up
None A catastrophic system error,
which caused the server to
crash, has been logged.
Run Diagnostics. Replace failed
assembly as indicated.
Unsupported
Processor Detected
System Halted
1 long, 1 short Processor not supported by
current system ROM
Check documentation for
supported processors, and if
supported, remove the
processor and update the
system to latest ROM.
FATAL ROM ERROR:
The System ROM is
not properly
programmed
1 long, 1 short ROM programmed in factory
incorrectly
Replace the physical ROM part.
101 - ROM Error 1 long, 1 short System ROM checksum Run Diagnostics. Replace failed
assembly as indicated.
101 - I/O ROM Error None Options ROM checksum Run Diagnostics. Replace failed
assembly as indicated.
102 - System Board
Failure
None DMA, timers, and so on
Replace the system board. Run
the Compaq System
Configuration Utility.
104 - ASR-2 Timer
Failure
None System board failure
Run Diagnostics. Replace failed
assembly as indicated.
105 - Current System
ROM is corrupt—
now booting
redundant System
ROM
2L Non-booted ROM image is
corrupt
Flash the ROM utilizing
ROMPaq.
162 - System
Options Not Set
2S Configuration incorrect Run the System Configuration
Utility and correct.
163—Time & Date
Not Set
2S Invalid time or date in
configuration memory
Run the System Configuration
Utility and correct.
164 - Memory Size
Error
2S Configuration memory incorrect Run the System Configuration
Utility and correct.
172 - Configuration
Nonvolatile Memory
Invalid
None Nonvolatile configuration corrupt
or jumper installed
Run the System Configuration
Utility and correct.
173 - Slot ID
Mismatch
None Board replaced, configuration not
updated
Run the System Configuration
Utility and correct.
174 - Configuration/
Slot Mismatch Device
Not Found
None PCI board not found Run the System Configuration
Utility and correct.
continued

Table of Contents

Other manuals for Compaq PROLIANT ML370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq PROLIANT ML370 and is the answer not in the manual?

Compaq PROLIANT ML370 Specifications

General IconGeneral
BrandCompaq
ModelPROLIANT ML370
CategoryServer
LanguageEnglish

Related product manuals