Compaq PROLIANT ML370 Maintenance And Service Guide

Chapter 2
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for
Compaq ProLiant ML370 Servers. The ProLiant ML370 Server is available in tower and rack
models. The Compaq ProLiant ML370 Maintenance and Service Guide shows the tower model.
In most cases, the rack model removal and replacement procedures are slightly different from
the tower model procedures. After completing all necessary removal and replacement
procedures, run the diagnostics program to verify that all components operate properly.
To service Compaq ProLiant ML370 Servers, you might need the following:
■ Torx T-15 screwdriver
■ From the Compaq SmartStart and Support Software CD:
G System Configuration Utility
G Drive Array Advanced Diagnostics
G Diagnostics

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English