Compaq PROLIANT ML370 - Warranty; Pre-Failure Warranty; Insight Manager Alert

2-6 Compaq ProLiant ML370 Maintenance and Service Guide
Front Bezel
NOTE: This procedure applies to the ProLiant ML370 tower model only.
To open the front bezel:
1. Unlock the front bezel keylock.
2. Swing the front bezel out away from the server.
To remove the front bezel, continue with the following step.
3. Lift up the front bezel, then pull it away from the chassis.
Figure 2-1. Removing the front bezel
Reverse steps 1 through 3 to replace the front bezel.