EasyManuals Logo

Compaq PROLIANT ML370 Maintenance And Service Guide

Compaq PROLIANT ML370
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
3-28 Compaq ProLiant ML370 Maintenance and Service Guide
200-299, Memory Test Error Codes
The 200 series of diagnostic error codes identifies failures with the memory subsystem.
Table 3-4
Memory Test Error Codes
Error Code Description Recommended Action
200-xx Invalid memory configuration. Reinsert memory modules in correct location and retest.
201-xx Memory machine ID test failed.
202-xx Memory system ROM checksum
failed.
1. Replace the system ROM and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and retest.
203-xx Memory write/read test failed.
204-xx Memory address test failed.
205-xx Walking I/O test failed.
206-xx Increment pattern test failed
1. Replace the memory module and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and retest.
207-xx Invalid memory
configuration-check DIMM
installation. DIMMs installed
have 8K refresh.
Replace DIMMs.
208-xx Invalid memory speed detected -
check DIMM installation. Slow
DIMMs may cause data loss.
Replace DIMMs with timing greater than 60 ns.
209-01 RAM long test failed.
209-02 Error while saving test block.
209-03 Error while restoring test block.
209-89 ECC error during testing.
1. Replace the memory module/board and retest.
2. Replace the system board and retest.
3. Replace the memory expansion board and retest.
210-xx Random pattern test failed. 1. Replace the memory module and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and retest.
211-01 RAND test failed.
211-02 Error while saving test block
211-03 Error while restoring test block
211-04 Insufficient memory to perform the
test
211-05 Failed inverted pattern compare,
but RAM was correct
211-89 ECC error during testing
1. Replace the memory module/board and retest.
2. Replace the system board and retest.
214-01 Data error during noise test
214-89 ECC error during testing
1. Replace the memory module/board and retest.
2. Replace the system board and retest.
215 Non-functioning DC-DC converter
for processor X
Replace the DC-DC converter (Processor Power
Module).

Table of Contents

Other manuals for Compaq PROLIANT ML370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq PROLIANT ML370 and is the answer not in the manual?

Compaq PROLIANT ML370 Specifications

General IconGeneral
BrandCompaq
ModelPROLIANT ML370
CategoryServer
LanguageEnglish

Related product manuals