EasyManuals Logo

Compaq PROLIANT ML370 Maintenance And Service Guide

Compaq PROLIANT ML370
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Index 5
correctable error
threshold exceeded 3-48,
3-49
Diagnostic Error 3-60
dirty data 3-36
disable command issued 3-39
drive (bay)
drive X failed 3-40
drive X inadvertently
replaced 3-40
firmware needs
upgrading 3-39
insufficient capacity 3-39
invalid M&P stamp 3-39
loose cable 3-39
needs replacing 3-40
replacement drive 3-39
replacement drive marked
OK 3-40
undergoing drive
recovery 3-40
upload code not
readable 3-40
Drive (bay) X is non-Compaq
supplied 3-41
drive monitoring
features unobtainable 3-40
not enabled 3-40
drive time-out 3-40
drive X indicates
position Y 3-40
duplicate write memory
error 3-40
Error Detected On Boot
Up 3-60
error occurred reading RIS
copy 3-41
fan
failure 3-48
inserted 3-48
not redundant 3-48
removed 3-48
host bus error 3-49
identify controller data did not
match NVRAM 3-41
identify logical drive data did not
match NVRAM 3-41
insufficient adapter
resources 3-41
logical drive X 3-41, 3-42
loose cable detected 3-42, 3-43
mirror data miscompare 3-43
NMI 3-61
no configuration for Accelerator
board 3-43
NVRAM configuration 3-43
overheat condition 3-48
power AC overload 3-49
power module
failure 3-49
not redundant 3-49
power supply
failure 3-49
inserted 3-49
not redundant 3-49
removed 3-49
Processor Exception 3-61
Processor Prefailure 3-60
Required System Fan
Failure 3-61
resolving 3-26
RIS copies between drives do not
match 3-43
SCSI Port X 3-43, 3-44
Server Manager Failure 3-61
set configuration command
issued 3-44
soft firmware upgrade
required 3-44
system configuration
battery low 3-49
system crash 3-49
system lockup 3-49
unable to communicate with
drive 3-44
uncorrectable error 3-48, 3-49
unknown disable code 3-44
unrecoverable read error 3-44
UPS A/C Line Failure Shutdown
or Battery Low 3-61
warning bit detected 3-45
warning, drive write cache
enabled on X 3-44
write memory error 3-45
wrong Accelerator 3-45
error codes See also test error codes
error codes, description 3-26
ESD See electrostatic discharge
event
AC voltage problem 3-49
automatic OS shutdown 3-49
correctable error
threshold exceeded 3-48,
3-49
threshold passed 3-48
fan
failure 3-48
inserted 3-48
not redundant 3-48
removed 3-48
host bus error 3-49
overheat condition 3-48

Table of Contents

Other manuals for Compaq PROLIANT ML370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq PROLIANT ML370 and is the answer not in the manual?

Compaq PROLIANT ML370 Specifications

General IconGeneral
BrandCompaq
ModelPROLIANT ML370
CategoryServer
LanguageEnglish

Related product manuals