Compaq PROLIANT ML370 Maintenance And Service Guide

3-12 Compaq ProLiant ML370 Maintenance and Service Guide
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of Problem Recommended Action
1611 - I/O Fan
(Fan X) failure
detected
2S I/O fan has failed Replace the failed fan.
1611 - CPU Fan
(Fan X) failure
detected
2S CPU fan has failed Replace the failed fan.
1612 - Primary
power supply failure
2S Primary power supply has failed Replace power supply as soon
as possible.
1613 - Low System
Battery
None Real time clock system battery is
running low on power
Run Diagnostics. Replace failed
assembly as indicated.
1615 - Power Supply
Failure, Power
Supply Unplugged, or
Power Supply Fan
Failure in Bay X
None A power supply has failed. Replace or check specified
power supply.
1617 - Fan controller
not responding
2S Fan controller failure Check and replace failed
controller assembly.
1617 - I/O Fan
controller not
responding
2S I/O fan controller failure Check and replace failed
controller assembly.
1617 - CPU Fan
controller not
responding
2S CPU fan controller failure Check and replace failed
controller assembly.
1620 - Locked SCSI
Bus Detected. Verify
SCSI bus cabling.
System halted.
None SCSI bus failure Run Diagnostics. Replace failed
assembly as indicated.
1621 - Current SCSI
bus cable
configuration is not
recommended
None Improper SCSI bus cabling Check documentation for proper
SCSI bus cabling.
1622 - Internal SCSI
Jumper Board Not
Installed
None The system has detected that the
array enabler board is not
installed.
Install the array enabler board.
continued

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English