Comtech EF Data HPOD - Page 142

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier Revision 6
Appendix B MN/HPOD.IOM
B–6
The HPOD Web Server Interface features four (4) navigation tabs at the top of each page.
Nested hyperlinks (shown in gray) grant access to in dividual Web pages. The hyperlink for the
RedundancypageisavailableundertheConfig tab.



Home Access Amplifier Monitor
Contact SNMP Utility Alarms
Support
Redundancy
FETs

ClicktheConfigtab,andthenselecttheRedundancyhyperlinktocontinue.
B.2.2 Config | Redundancy Page
UsethispagetoconfiguretheHPOD1:1or1:2redundancyoperationssettings.













Figure B-2. Config | Redundancy page

Atanytime,click[Refresh]toupdatethispageandseethemostrecentdata.