Comtech EF Data HPOD - Page 71

HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier Revision 6
Ethernet-based Remote Product Management MN/HPOD.IOM
4–15

TheMACAddressisread‐only.Itissetatthefactorytoaguaranteeduniqueaddress
andcannotbemodified.
System Account Access Information
• ReadOnly/Read/Write/AdminNamesandPasswords–Thesedefaults,setatthe
factory,maybechangedasneeded:

Field
Factory Default
Name / Password
Maximum
Characters
Format
Read Only Name / Password monitor / 1234
10 alphanumeric
Read/Write Name / Password opcenter / 1234
Admin Name / Password comtech / comtech

• SMTP Server – Set the mail  server IP address from where you want to send e‐mail, in the
form0.0.0.0.

• SMTP Domain Name / Destination – The Administrator  must assign the SMTP Domain
Name and Destination. This is necessary to use the Home | Support page e‐mail feature
(seeSect
.4.5.5.1.3).

Thedestinationanddomainnamearetypicallyfoundinanemailaddress:

Destination Domain Name
techsupport @ comtechefdata.com

Click[SubmitAccess]tosavethesesettings,orclick[Reset]toreverttothepreviouslyassigned
SystemAccountAccessInformationsettings.
Webpage Timeout
Thisisthemaximumamountoftimethatthecomputercanremainidlebeforethesessionlogs
out.Afterthetimeoutoccurs,youmustlogintotheWebServerInterfaceagain.

Usethedrop‐downlisttoselect8Hoursor5Minutes(default),andthenclick[Change]tos ave.