Comtech EF Data HPOD - Page 99

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier Revision 6
Serial-Based Remote Product Management MN/HPOD.IOM
5–19
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
IP Address IPA= 18 bytes Command or Query.
Set the IP address and network prefix for the 10/100 BaseT Ethernet management port, in the form
aaa.bbb.ccc.ddd.yy where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy = 08-30
Default Value: 192.168.001.004.24
Example: 192.168.001.004.24
IPA=
IPA?
IPA*
IPA#
IPA?
IPA=
aaa.bbb.ccc.ddd.yy
(see Description of
Arguments)
Gateway
Address
IPG= 15 bytes Command or Query.
Set the Gateway IP address for the 10/100 Base Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 192.168.001.005
Example: IPG = 192.168.001.005
IPG=
IPG?
IPG*
IPG?
IPG =
aaa.bbb.ccc.ddd
(see Description of
Arguments)
Unit MAC
Address
N/
A
17 bytes Query only.
Reports, in hexadecimal, the MAC address of the unit.
Example: MAC=00-06-B0-00-D2-A7
MAC=
MAC*
MAC?
MAC=
xx-xx-xx-xx-xx-xx
(See Description of
Arguments)
Time Protocol
Enable
TPE 1 byte,
value of 0,1
Command or Query.
Enables or Disables the Time Protocol, in the form x, where:
0 = Time protocol disabled
1 = Time protocol enabled
Example: TPE=1 (Time protocol enabled)
TPE=
TPE?
TPE?
TPE=x
(See Description of
Arguments)
Time Protocol
Server
TPS 15 bytes Command or Query.
Sets or returns the Time Server IP address for the unit Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 255.255.255.255
Example: IPG = 192.168.001.005
TPS=
TPS?
TPS?
TPS=
aaa.bbb.ccc.ddd
(see Description of
Arguments)

