Conair CSC - Scaling Format Selection and Control; Setpoint Control; Analog Input;Output

PULLER
CONTROL
SETTINGS
Code Parameter Range Default Customer
36 Max RPM (external 1-9999
reference input: secondary mode)
37 Max RPM (feedback: 1-9999
secondary mode)
38 Max RPM (auxiliary 1-9999
input: secondary mode)
Scaling Format Selection and Control
60 Output format 1-2
61 Primary scaling mode 0-3 01
62 Secondary scaling mode 0-3
63 Primary display mode 1-2 01
64 Secondary display mode 1-2
Tuning
65 Gain 0-9999
66 Reset (integral) 0-9999
67 Rate (derivative) 0-9999
68 Trim authority 0-100
69 Rate threshold 0-100
Serial Communications
70 Device addresses 1-32
71 Baud rate 1-6
72 Character format 1-3
73 Control mask 0-255
Alarms and Limits
74 Zero speed logic 0-1
Scaling Format Selection and Control
75 Primary mode 0-9999
positive offset
76 Primary mode 0-9999
negative offset
77 Secondary mode 0-9999
positive offset
78 Secondary mode 0-9999
negative offset
Setpoint Control
79 Setpoint mask 0-2
Analog Input/Output
80 Analog output 0-99
function select
81 Analog output range 0-9999
82 Analog output zero 0-2048
83 Analog output span 2048-4095
84 Analog input 0-7
function select
85 Analog input zero 0-2048
86 Analog input span 2048-4095
PULLER CONTROL SETTINGS UGE048/1103
F-2 APPENDIX