Coretec BS Series - The Relation with the Mitsubishi Electric Servo System

BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 10 -
CE marking based on Machinery Directive is not done to the partly completed
machinery. Therefore, for the case that circulates by the partly completed machinery
until this equipment is incorporater into the final machinery in Europe. It is necessary
for the declaration of incorporation and the manual of this equipment to be appended to
this equipment
1.7.
The relation with the Mitsubishi Electric servo system
BS controller works as a higher rank controller of Mitsubishi Electric servo system
MR-J3A.
Please refer to the manual of the Mitsubishi Electric issue about the details of a
MR-J3A system.