Coretec BS Series - 2 Before Use; Characteristics of Servo Press; Possible to Record Program Execution Result; Programmable Action Possible

BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 11 -
2.
Before use
2.1.
Characteristics of Servo press
The Servo press provides new production controls, press methods and other actions
by programmable operations, controls and monitoring of the load and stroke
amount. The characteristics are given below.
2.1.1.
Possible to record program execution result
Up to 2700 pieces of data of press results can be recorded inside the BS
Controller.
By using communications software, infinite data can be recorded.
2.1.2.
Programmable action possible
Among factors such as speed, load stroke, time and communications with
external I/O, the programmable factor is what primarily concerns the
customer.
(Refer to the BS Configurator Instruction Manual)
2.1.3.
Display of load and stroke during program execution and Graph display
By using special communications software, the values of load and stroke can
be monitored. The electric current can also be monitored by selecting the
details screen. A graph can be displayed after actions and detailed
information can be obtained.
2.2.
The suiting tool
Big-sized servo press controller BS-M3A works as a higher rank controller of
Mitsubishi Electric servo amplifier MR-J3A. The combination of servo amplifier
and a motor is decided according to the adaptation load of a tool.
Tool type
Adaptation load
(kN)
Servo amplifier
Motor
BS100 series
100
MR-J3-500A
HC-RP503(B)K
BS200 series
200
MR-J3-700A
HF-SP702(B)K
2.3.
Accompanying items
 BS-M3A-1B main body
 A set of plug for CN34 (EMERGENCY)
Maker：Phoenix contact Model：MC1.5/2-STF-3.81
 A set of plug for CN10 (DC power supply)