Coretec BS Series - Writing of a Product Name and a Serial Number

BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 34 -
7.7.
Writing of a product name and a serial number
The flow chart in the case of recording a product name, a serial number, etc.
to numerical data using Anybus i/f is shown
PLC
BS
PC
A product name, a serial
number, etc. are set to
each spindles via
AnyBus I/f.
Start each
spindles
The status sense to each
spindles.
A numerical and waveform
data are collected from the
ended spindles.
Data is saved.