BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 68 -
About a tool, we recommend you implementation of a periodical maintenance.
By BS controller, the number of times of operation and the total information on
the mileage of a ball screw are managed. A monitor is possible for these
information by the maintenance information function of BS Configurator. A
near maintenance cycle can be obtained from these information and the load
situation of a program. Please ask for details the window in your duty.
An overhaul must be carried out at our company and any overhaul carried
out by another company falls outside our guaranteed coverage.
If you have any questions on the Servo press, please contact us.
Devices into which electronic equipment is mounted must not be discarded as
domestic waste. Please obey the local laws or regulations effective at present
for electrical and electronic equipment waste.
CORETEC Fastening Innovators
-1121
-94-9016
To Previous Page
Loading...