BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 52 -
Configurator. If the numerical value is set up according to the guide screen, a
program will be generated automatically.
Please send the created program to a BS controller.
Although execution of a program is usually performed by PI / O operation, it is
possible even if it uses the program execution function of BS Configurator.
When wiring of PI/O and a control system are incomplete, it is effective as a
check means of operation.
We recommend use of the numerical monitor of BS Configurator, or a
waveform monitor function to debugging of a program. Please refer to the
applicable item of a BS Configurator operation description about those details.
To Next Page
Loading...