BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 7 -
Symbols are used to provide warnings in this instruction manual and for indication for
proper product use and to prevent danger to the user or other people and damage to
property from occurring. Understand the indication meanings before reading this
manual.
Observe the following for safety
This symbol assumes the possibility that accidental
death or serious injury may occur immediately to the
user, if the symbol is neglected and the product is
incorrectly handled.
The power source is as high as 200V. Look out for electric shock.
This symbol assumes that there is a potential for
personal death or injury if this expression is ignored
and this product is mishandled.
In a case where the product is used in an application in which an accident resulting in
death or injury or a serious expansion of damage is predictable, take safety measures such
as installing a fail-safe device.
Do not use around combustible gas. If disregarded, it may lead to an explosion.
In a case of handling cables and connectors, etc., cut off the power temporarily without fail.
If disregarded, it may lead to an electric shock.
Do not remove the cover, disassemble, repair or modify the product. If disregarded, it may
lead to an electric shock.
Make sure to connect the protection conductor terminal to ground.
Electric shock might be caused.
Do not touch the power supply terminal in this equipment within five seconds after the
power is turned off. It could cause the electric shock.
Do not forcibly twist, pull or scratch the power cord or cord of the AC plug.
To Next Page
Loading...