Coretec BS Series - The Communication Method with an IP Address Unknown Controller

BS Controller for AC SERVO PRESS
Instruction Manual Ver1.08
BS-M3A-1B
- 43 -
9.8.2.
The communication method with an IP address unknown controller
Please use a default fixed IP address to the controller with an unknown setup
of an IP address. When a spindle number is set as 71 to 99 with the rotary SW
of the upper part in front of a controller, the IP address of the controller is as
follows.
192.168.15.(spindle number - 70)
A new IP address becomes effective by re-injection of a power supply.