7 - Koecdriver 47
Basically you can disable cup and can sensors, if not present or not working. You can also setup
the stirring time and stirring pause intervals for all colorants, Write button updates selected
setting to machine, Read button reads and creates a report about parameter values read from the
machine.
7.3 Purge, init and dispense commands
Final tests cover the testing of pump clamping mechanisms and the proper opening of valves when
dispensing.
Function Purge (Sequential) dispenses pumps one by one starting from the first pump. Having
the front cover open its possible to see that right pump is picked from the down position to
dispense and later that right valve is opened when the dispense is activated.
To Next Page
Loading...
