Crestron Electronics CP4N - Page 15

Product Manual — Doc. 8559B 4-Series™ Control Systems • 9
.AVFramework Software
The CP4 provides native support for the .AVFramework™ software program. .AV Framework
software is a web-based management solution that is used to deploy scalable Crestron®
enterprise room solutions without requiring any programming. For more information on the
capabilities supported by .AV Framework, visit www.crestron.com/avframework.
Enhanced Enterprise-Grade Security
The CP4 is an enterprise-class control processor that can be deployed across hundreds of spaces
and set up easily using a web browser, Crestron Toolbox™ software, or XiO Cloud. It employs
standard network security protocols, including 802.1X network access control, Active Directory®
service authentication, SSH, TLS, and HTTPS to ensure reliability and compliance with your
organization’s IT policies.
The CP4 is configured to meet Crestron's enhanced security standards right out of the box. The
CP4 ships with authentication turned on and requires creating an administrator account before
access is granted to device configuration and control interfaces.
SNMPV3 Support
Built-in SNMP V3 support permits integration with third-party IT management software,
allowing network administrators to manage and control Crestron systems on the network in an
IT-friendly format.
BACnet Support
Native support for the BACnet communication protocol provides a direct interface to third-party
building management systems over Ethernet, simplifying integration with HVAC, security, and
other systems. Using BACnet, each system runs independently but communicates together on
one platform.
1
AppleHomeKit Integration
The CP4 supports integration with an Apple® HomeKit® technology system. Once the CP4 is
paired with a HomeKit system via SIMPLprogramming, a Crestron TSR-310 can be used to
control supported Apple devices. Apairing QRcode is affixed to the CP4 that makes it easy to
pair the control system directly to the Apple Home app.
2
Notes:
1. A BACnet and IP license is required. A free license is available to support up to 50 BACnet objects on a single
4-Series control system. Support for more than 50 BACnet objects requires the purchase of one
SW-3SERIES-BACNET-50+ license. The CP4 supports a maximum of 1000 BACnet objects when dedicated for
BACnet use only. Actual capabilities are contingent upon the overall program size and complexity. To obtain the
license, visit www.crestron.com/bacnetlicense.
2. This feature is only available when using the TSR-310. Other Crestron touch screens, handheld remotes, and
keypads are not supported. For these interfaces, traditional IR or CEC control must be used to control supported
Apple devices.